Model #66515529000 Kenmore dishwasher

  • Frame And Console Parts
    3 Results
  • Inner Door Parts
    3 Results
  • Tub Assembly Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Dishrack Parts
    3 Results
  • Miscellaneous And Optional Parts
    3 Results

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

kenwood dish wash 665-15529000.soap dispenser wont open . cant find relay , bimetal ele. to actuate the plastic slididng ladder assembly to release catch

A:

The soap dispenser mechanism does not use a bi-metal or a solenoid to release the soap dispenser door, it's all mechanical. There is a cam that is slid over the shaft of the timer which rotates along with the timer which will cause the cam follower to release the soap dispenser door at the beginning of the second wash cycle. Set the timer to off and latch the dispenser door. Open the door and manually rotate the timer clockwise and the dispenser door should open when the timer dial reaches the second wash cycle. I added an image below showing the components involved in the dispenser operation.

Read More
Joey S -
Sears Technician
June 29, 2010
Q:

How can I correct the model number that I submitted on a question that I posted earlier (2hrs) today?

A:

Thanks for the correction. I made the correction and posted an answer based on the correct model number 665.15529000.

Read More
Lyle W -
Sears Technician
October 03, 2008
Q:

where does plastic post fit inside dishwasher

A:

The pressure tower mounts in the dead center of the lower rack. The tower must be inserted from the bottom up and then twisted in order to lock it in place.

Read More
Joey S -
Sears Technician
October 29, 2010

Top Parts