Model #66513969K013 Kenmore Elite dishwasher

  • Door Panel Parts
    3 Results
  • Control Panel And Latch Parts
    3 Results
  • Inner Door Parts
    3 Results
  • Fill, Drain And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump, Washarm And Motor Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Heater Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Optional Parts (not Included)
    3 Results

Question and Answers

Q:

Do I have all necessary hoses or plugs for Kenmore dishwasher 66513969K013? Kenmore 66513969K013

A:

Thank you for your question and I understand your concern.

Looking at the parts image of this specific model, it looks like you drain pump is connected to the bottom of the sump assembly and this is where the drain hose would connect. If you see the drain hose connected to a drain pump, then the outlet port you see likely see has a plug in it. Before installing the dishwasher under the counter, manually pour a couple of cups of water in the bottom of the dishwasher and see if any water leaks. Place a towel under the dishwasher just in case water leaks out of the port. If no water leaks, this port is not used on this model.

The manufacturer may have made a change in the sump assembly. If you could send a picture of underneath of the dishwasher if would be helpful.  I added an image below of what the parts image shows.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.


Read More
Joey S -
Sears Technician
October 21, 2013