Model #66513793K600 KENMORE ELITE dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results


Question and Answers


how to replace the kenmore dishwasher door spring model number 66513793k600


I see that Maira E has given you most links to aid in the repair of your dishwasher. I would like to add a few more details to make the repair a little easier. I have provided you with an image below showing how to route the door link.

Please follow these steps to replace the door spring.

  • Turn the water and electric off to the dishwasher.
  • Remove the two screws holding the toe panel in place.
  • Locate and remove the dishwasher mounting screws. They are usually in the counter top.
  • Then slide the dishwasher forward enough to access the side of the dishwasher where the springs connect. Watch the water supply line and the drain hose while sliding out the dishwasher. If the lines are to short, you have to disconnect them.
  • Reconnect the spring using the images below as a guide. Once the springs are connected, you can reinstall the dishwasher in the reverse order.

If you run into problems please submit more details and I will give you the best answer to remedy the issue.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: [Sears

Read More
Mark T -
Sears Technician
September 14, 2010

Top Parts