Model #66513593K600 KENMORE Dishwasher

  • Frame And Console Parts
    3 Results
  • Inner Door Parts
    3 Results
  • Tub Assembly Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Dishrack And Water Feed Parts
    3 Results
  • Lower Dishrack Parts, Optional Parts (not Included)
    3 Results

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore dishwasher model# 66513593k600 won't drain

A:

Hi John,

Thank you for submitting a question to Manage My Life.

I recommend that you examine the check valve. The first image shows the drain hose connected to the check valve. I recommend that you shut off the breaker to the dishwasher and remove the bottom front access panel to access this end of the drain hose. Use a shallow pan to catch any residual water that will drain out of the dishwasher when you remove this hose. Remove the other end of the hose from the garbage disposal. Blow air through the drain hose to verify that it is clear. If you have an air gap installed, you will need to check the line between the check valve and the air gap and then the line between the air gap and the garbage disposal. The second image shows the check valve with the drain hose removed. Unscrew the check valve and remove it to check the flapper valve as shown in the third image. According to your details, you may have already conducted these checks in the proper manner. If not, I recommend that you recheck these issues. If you find no problems with the check valve and drain line, I recommend that you check the opening of the sump where the check valve screws in for a clog or restriction. If you need to access the sump area from inside the dishwasher, this link of a previous answer shows how to disassemble the pump: How do I access the drain impeller on a Kenmore model 665.16759791 dishwasher that wont drain? .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram or to purchase any parts needed; Sears Parts Direct .

These tips may help you resolve this drain issue in the dishwasher. If you need more help, please reply with additional details and we will try to assist you further.

Landell

Read More
Landell -
Sears Technician
January 13, 2012
Q:

Dishwasher reset for Model # 66513593k600, stock # 13593, Type no: 280-2, Serial # FU0127846.

A:

Hi Joe,

Thank you for submitting a question to Manage My Life.

From your description you most likely have a shorted keypad.

The tech sheet for this dishwasher does not say that running the diagnostics cycle will reset the control, but it won't hurt to try it.

Starting the DIAGNOSTICS CYCLE AND RAPID ADVANCE SERVICE FEATURE. Pressing the following option keys in the sequence shown will either start the Diagnostics Cycle or turn on the Rapid Advance feature for stepping through customer selectable cycles: HIGH TEMP WASH > HEATED DRY > HIGH TEMP WASH > HEATED DRY or POWER SCOUR (HIGH TEMP SCRUB) > HEATED DRY > POWER SCOUR (HIGH TEMP SCRUB) > HEATED DRY.

If the above key sequence is entered after starting a cycle, the Rapid Advance feature is turned on, which allows the operator to manually advance the currently running cycle, interval by interval, by pressing the Start/Resume key.

If the above key sequence is entered with the dishwasher in Standby, the Diagnostics Cycle is started. The Diagnostics Cycle can be rapid-advanced, interval by interval, by pressing the Start/Resume key.

I am including the pertinent portions of the tech sheet in the images below. If you have an ohm/volt meter and are confident in your technical abilities, please utilize the checks below. Working with live electrical current can be very hazardous and possibly deadly. Do not attempt these measurements without the proper tools and safeguards. If you are not already sure you can perform these checks safely and competently, refer this work to a qualified professional.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram or to purchase any parts needed; Sears Parts Direct .

I hope this is helpful. Check the things I have covered here, and if I may be of further assistance, include more details in a reply to this post.

Landell

Read More
Landell -
Sears Technician
March 06, 2012
Q:

What would cause my Kenmore dishwasher to stop in the middle of a cycle and go dead?

A:

The most likely failure is a blown thermal fuse up inside the control panel or bad power supply connection at the dishwasher junction box located behind the lower access panel. I would check the power supply connections inside the junction box first. NOTE: Disconnect the power supply to the dishwasher before removing the junction box cover and checking the wire connections. If the wiring connections are okay, the voltage supply should be checked and verified at the power supply. NOTE: I do not recommend checking voltages unless you have experience and you feel safe and confident in doing so, otherwise I recommend calling a service technician to diagnose and repair your dishwasher. If the proper voltage is verified at the junction box then I recommend checking the thermal fuse inside the control panel. The thermal fuse will have two tan wires attached to it and it will be clipped on the side of the control board housing. Disconnect power to the dishwasher and remove the six screws along the back side of the control panel to remove. Disconnect the thermal fuse and check the fuse for continuity with an ohm meter. See image below.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
February 25, 2010

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show