Model #636 Porter Cable drill driver

  • Rockwell Drills
    3 Results

Question and Answers

Q:

Craftman snow thrower 636 881800

A:

Thank you for your question.

I am sorry you are having a problem with the snow blower. I will be happy to assist you with replacing the fuel line. Before you begin the repair, drain any fuel left in the tank. The best way to drain the fuel is with a turkey baster. Once the fuel is removed click on the image below. The image contains the instructions for removing the fuel tank. Once you have the fuel tank removed, you should be able to replace the fuel line. I recommend using a factory part. The fuel line on your model is pre bent. The part number for the fuel line is 791874 and can be ordered from our parts website: Sears Parts Direct .

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
March 18, 2012
Q:

what does F9 mean on micro wave model 721 636 643 00

A:

Thank you for your question. The F9 error code indicates an inverter failure. This can sometimes by caused by a power surge or glitch through the electrical lines. You can sometimes clear this fault by completely unplugging the microwave for 1 minute. Plug it back in and see if the fault code returns. If it does, then you have an internal component failure that will need to be serviced by a technician. Due to the inherent dangers involved in repairing microwaves it is strongly recommend that a service technician service the microwave. Internal capacitors can retain a lethal electrical charge even though the unit is completely unplugged. A microwave radiation leakage test must be performed on the unit following any internal component repair.

We will give repair instructions on any other appliance that a customer can safely complete.

You can have the microwave repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
December 29, 2010