Model #627804X6A Murray snowthrower, gas

  • Electric Start Assembly
    3 Results
  • Engine Assembly
    3 Results
  • Frame Components
    3 Results
  • Drive Components
    3 Results
  • Gear Case
    3 Results
  • Auger Housing
    3 Results
  • Discharge Chute
    3 Results
  • Wheels
    3 Results
  • Handle Assembly
    3 Results
  • Handle Assembly
    3 Results
  • Chute Rod Assembly
    3 Results
  • Decals
    3 Results

Question and Answers

Q:

627804x6a

A:

Thank you for your question.

I can understand wanting to know which belt drives the impeller and auger assembly.

  • The belt that is in front is the auger and impeller drive belt.

  • The auger drive belt is #63 and 60 is the split motor pulley for that belt.

  • The belt idler is #48 for the auger drive.

I have placed two pictures below for your reference.

  • Before I would change the belt I would check to see if the belt tensioner is pushing on the belt when you push the left handle down. If it is not there is an adjusting threaded rod to adjust to tighten the cable.

If it is tightening the belt and the belt is not broken I would look at the front augers to see if the shear pins are broken and not feeding the snow into the impeller.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
December 23, 2010
Q:

Is there an oil filter in 627804X6A snow blower?

A:

Thank you for your question.

I will be happy to assist you. I looked up the model number you submitted. This model does not have an oil filter. I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 02, 2013

Recommended maintenance parts & accessories

Show 3 more
No more item to show