Model #625349290 Kenmore water dispenser

  • Unit Parts
    3 Results

Question and Answers


I have a Kenmore Solution dispensing system Model 625349290 which I am unable to get a prime for.


To prime the pump you have to bleed the air out of the pump and hoses.

Do this through the relief valve on the pump. When the plunger on the pump begins to pump the fluid you need to open the relief valve, just crack it.

When the pump make the return stroke, close the relief valve so the pump doesn't draw in air.

Cover the relief valve with a cloth or paper towel so the bleach doesn't get into your eyes. Put something down to catch the bleach that runs out. Wash up good when you are through.

It might take several strokes of the pump to bleed the air out of the lines and some bleach will be pumped out also.

Read More
Jimmy K -
Sears Technician