Model #625348831 Kenmore water softener

  • Softener Assembly
    3 Results
  • Brine Valve Assembly
    3 Results
  • Valve Assembly
    3 Results
  • Valve
    3 Results

Error Codes

Error Code:



Question and Answers


My Kenmore 80 Plus, water softener model 625348831, has very low water pressure. The pressure is good with the bypass.


There are several possible things that could cause the water softener to restrict the water flow. Originally there was a screen on the inlet side of the valve, if this screen is there and is restricted it could cause the problem.

There is a top distributor just underneath the valve where the motor and cam are and a lower distributor at the bottom of the resin bed. Either of these can get restricted with debris from the water.

Sometimes the resin bed will breakdown with age and not let the water through freely anymore. Replacing the resin bed is an expensive and time consuming job.

It might be time to consider a new water softener.

Read More
Jimmy K -
Sears Technician
February 24, 2009