Model #62514 WARDS NPA Hedge Trimmer, Gas

  • No Parts Or Service Available
    3 Results
Find part by diagram >

Question and Answers


Primer/purge bulb fuel line routing 358.352161


Thank You for choosing Sears I regret to hear that you are having issues with your chainsaw and do understand your frustration. Glad to help out. Im looking at your model number 358.352161. I will give you a picture with the routing of the fuel lines below. Here is also a link for a video as well. 

You will need a sharp knife and a long pair of needle nose pliers or even better a pair of curved hemostats so you can reach into the fuel tank to pull the fuel lines through. You will need the knife to cut the fuel line on a sharp angle to make it easier to get it into the fuel tank.

Some of the replacement fuel line kits come with instructions. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information.

Thank you for choosing Sears

Read More
Sherman_G_Wallace -
Sears Technician
June 13, 2014

The picture was very helpful, but does the fuel tank line/filter go to the carb brass fitting in the center of carb or to the black capped fitting above it? It would seem the fuel tank line would go to the center carb fitting and the purge bulb line to the other black capped carb fitting. Please confirm. Thanks

Read More
James -
June 25, 2014

Still waiting for an answer to the follow-up question above made on 6-25-14. The videos were not clear on this either.

Read More
James -
June 30, 2014
See more answers