Model #61SWX01W HITACHI Projection/Digital 42" and above TV

  • Cabinet Parts
    3 Results
  • Cabinet Parts
    3 Results
Find part by diagram >

Question and Answers


for MMH EXPERT_DA. my TV is a Hitachi 61SWX01B and the combo is a Sansui VCDVD4005 previous question: I have a Sansui DVD-RW recorder and VCR combo that has been hooked up and working find...


I changed the model of the Sansui you gave me from a VCDVD4005 to a VRDVD4005. The TV I am going to assume you mean a 61SWX01W and not a 61SWX10B. If you look at the owner's manual here on page 20 you will see that you need to use the composite, yellow white and red, to receive both the VCR and DVD. At the bottom at the page it also mentions to go to page 47 to make sure the progressive scan is turned off. Also make sure you check out the connection guide for this TV yourself here on page 18. Notice that input one has both connections for composite and component. I think the problem is going to be on either the connection to the TV or the output of the combo. This is assuming that the combo works fine. Unfortunately that’s another possibility.

Read More
David A. - Personal Solutions Manager -
Sears Technician
June 04, 2009