Model #603F664-1001 KENMORE Furnace- Wall

  • Limited Warranty
    3 Results
Find part by diagram >

Question and Answers

Q:

I have a Kenmore stove model # 790.7656 1001 I am switching it back to natural gas from propane.

A:

I did not find information on a Kenmore gas range with model 790.76561001. I suspect that you may have mis-typed that model number. The information shown below may help you with the conversion of that range. If necessary, reply with additional details and an updated model number.

NOTE: The conversion should be performed by a qualified installer.

The first page below shows the typical natural gas conversion instructions in the last paragraph. You will normally need to convert the regulator back to natural gas. You will also need to adjust the oven orifice hoods back to the natural gas position. The second image shows that procedure for a typical Kenmore gas range that begins with model 790. . . You will then need to adjust the air baffles so that the flames for the oven burners are the right height.

That information should be in the LP conversion instructions for your range. If you need more help, reply with that updated model number and we will assist you further.

If you need a qualified installer, you can contact your local gas supplier. You may also be able to find a pre-screened service provider on the ServiceLive.com website.

Read More
Lyle W -
Sears Technician
September 17, 2012