Model #59672912200 KENMORE Bottom-Mount Refrigerator

  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Controls
    3 Results
  • Refrigerator Shelving
    3 Results
  • Interior Cabinet/freezer Shelving
    3 Results
  • Evaporator Area/rollers
    3 Results
  • Compressor
    3 Results
  • Cabinet Back
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

instructions replacing icemaker

A:

Thank you for your question.

I will be able to help you with replacing the ice maker in the refrigerator. First, unplug the refrigerator from the wall. Then remove the freezer drawer. The instructions for removing the drawer are in the image below. Once the drawer is out remove the pull our shelf. You now have access to the ice maker. There should be one screw on bottom that has to removed. Then two on the top that need to be loosened. The two on the top can be difficult to see but they are there. Once they are out the ice maker should be loose. Just disconnect the wires and it is out. Make sure the new ice maker looks the same where it mounts and has the same wire connector. If the connector is different, you can remove the harness from the old ice maker and use it. Then install the ice maker in the reverse order. Make sure the fill tube it the fill cup on the back of the ice maker. After the ice maker is in restore the power and wait for it to make the first batch of cubes. You will want to throw out the first batch ice. Then you are done.

Click here to watch a video on how to replace a ice maker.

Please let me know if you need further assistance on the repair of the icemaker.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
June 25, 2011