Model #59665239404 Kenmore bottom-mount refrigerator

  • Cabinet Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Unit Parts
    3 Results
  • Shelf Parts
    3 Results

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Change drain pan

A:

Thank you for your question.

I am sorry you are having a problem with the drip pan. The drip pan on this model is located in the back of the unit. First, unplug the unit from the wall. Then remove the access panel on the back of the refrigerator. I looked at the parts list and it looks like you have to remove condensate fan first. Once the fan is out of the way, try to remove the drain pan. I know on some models require you to remove the bolts on the back that secure the bottom pan to the cabinet. Then tip the refrigerator forward a little to gain access to the drain pan. Just be careful not to move the refrigerate line too much because they will break if moved too much.

We usually recommend having a service technician replace the pan but if you feel confident in your ability give it a shot.

I hope this is helpful.

Please let me know if you need further assistance on the repair of the refrigerator.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
August 09, 2011
A:

The drain pan on your model cannot be removed to be cleaned. This mode has refrigerant line running into the pan to aid in evaporating the water. If you accidently break one of the lines, it is a costly repair. If it has to be cleaned, you will need to pull the unit out from the wall and unplug it. Then remove the back access panel. Once you have access to the drain pan carefully wipe it out with a dry cloth. If it is bad, you can use hot water and liquid dish soap to clean it. Just be careful around the refrigerant lines and do not use harsh chemicals. Anything other tan liquid dish soap could corrode the refrigerant lines. I hope this is helpful. If you need further assistance, please reply below with more details. Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
October 16, 2011
See more answers

Top Parts