Model #587700310 KENMORE Dishwasher

  • Door
    3 Results
  • Control Panel
    3 Results
  • Frame
    3 Results
  • Tub
    3 Results
  • Motor, Heater, And Spray Arm
    3 Results
  • Top
    3 Results
  • Rack
    3 Results
Find part by diagram >


Error Codes

Error Code:



Question and Answers


rinse aid 587700310 Kenmore Kenmore portable dishwasher


Thank you for choosing and being a valued member. I can certainly assist you. 

I am not seeing a rinse aid installed on this dishwasher. the white residue on your dishes can be hard water particles. 

This film can be caused by two things. One is soap residue and the other is mineral residue.

To determine which film it is can be determined with a simple test. Take a glass with film on it and run it under the faucet with water and use your thumb to rub the film. Dry the glass completely and check if the film is still there. 

Soap film will wash off easily and if the glass is clean then the film is soap suds. 

The problem from to much soap can be caused by multiple things. A poor drain, not enough water, too much rinse agent or the water is not hot enough. These are things that can be repaired. 


If the glass still has film on it then it can be mineral deposits. When you run water on the glass it will look clean till it dries and then you see the film. 

You can also visit for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 15, 2015