Model #58715149403 Kenmore dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Tub
    3 Results
  • Motor & Pump
    3 Results
  • Frame
    3 Results
  • Racks
    3 Results

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore Dishwasher

A:

If that circulation pump motor is not running when the dishwasher should be spraying then you could have a bad timer or a failed circulation pump. A wiring failure would also prevent the motor from running in that wash mode.

If the circulation pump is running then you could have a mechanical failure in that pump or a problem with the spray arms.

I recommend that you check the spray arms in that situation. If you find a cracked or split spray arm, then you will need to replace some components. Here is a link for a page where you can order parts: Kenmore Dishwasher 587.15149403 Parts . Be sure that you shut off the house circuit breaker for the dishwasher before accessing internal components.

These initial tips may help you determine the cause of your failure. If you need more help, reply with additional details.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
May 01, 2012
Q:

Why won't my dishwasher start or make any noise?

A:

Most likely one of the 2 door switches is not closing when the door is shut. Make sure the door is fully shut or it will not start. Try opening and shutting the door a few times to see if it will start. If it fails to start check the house circuit breaker for the dishwasher and reset it and then try the dishwasher again. It could also have a bad power supply connection at the dishwasher too.

If it fails to operate call a service technician to diagnose and repair your in warranty dishwasher.

Read More
Joey S -
Sears Technician
June 26, 2008