Model #580768321 CRAFTSMAN Power Washer, Gas

  • Main Unit
    3 Results
  • Pump
    3 Results
Find part by diagram >

Question and Answers


I have a question about a Sears power washer model 580768321. Is there a typical repair kit I can buy to fix it before I replace the pump or the entire washer?


The most likely causes for low pressure are a stopped up nozzle in the wand or a bypass valve that needs cleaning or replacing.

If you use detergent or have hard water, the deposits cause the most problems at these spots. Try cleaning the nozzle and the bypass valve before replacing anything.

You can see a parts diagram and list for the pressure washer at []. The nozzle is located at the end of the wand, the bypass valve screws into the body of the pump. The parts diagram will help you locate them.

Read More
Jimmy K -
Sears Technician