Model #580768001 CRAFTSMAN Power Washer, Gas

  • Main Unit
    3 Results
  • Pump
    3 Results
Find part by diagram >

Question and Answers


craftsman power washer


I'm sorry that you are having some difficulties with your Craftsman Pressure Washer. I did a little research for you at and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you decide to schedule service and have a qualified technician help you, I have also attached a link to I hope these links will help until your expert can respond.

Read More
James -
June 07, 2011

Thank you for your question.

I can understand wanting to remove the hose and it will not come off even though you have it unscrewed.

I think if you follow Jimmy K instructions from a previous answer you will be successful in getting the fitting to come off.

If you are not successful here is some more information.

There is an o-ring on the center part of the hose that is stuck in the water fitting.

Accelerator hose .

Look at the fitting in the picture in the web-site and you will have to pull the hose off with a little more force.

If you pull on the hose fitting with a circular motion it should break free if you have gotten the threaded collar all the way off the threaded fitting.

I hope this will help with your removal of the hose.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
June 08, 2011
See more answers

What type oil do I use for a Craftsman model 580.768001 pressure washer?


The pressure washer will use two kinds of oil.

The engine uses 20 ounces of SAE 30 weight oil in the engine.

The pump will use 120 milliliters of a 80W90 weight oil.

I hope this information is helpful in solving your problem but if any questions come up then submit another question for additional assistance on this problem.

Read More
Fred M -
Sears Technician
April 29, 2009