Model #580752193 Craftsman power washer, gas

  • Pressure Washer
    3 Results

Question and Answers

Q:

POWERWASHER CORD STUCK

A:

Thank you for your question on the pressure washer not starting.

A couple of things we can try are pulling the trigger on the handle to relieve some of the pressure in the pump and try starting the engine.

I would suggest pulling the spark plug on the engine to see if for some reason some oil got up into the head when you were moving it.

It is possible that the unloader valve did not unload and the pump is in a hydraulic lock. It should release when you pull the trigger if that is the case.

The other possibility is that something in the pump is locked and you will need to remove the three bolts and drop the pump and then try pulling the engine over to see which one may be locked up.

Please let me know what you found out and we can continue troubleshooting with that information.

Sam A.

Read More
Sam A -
Sears Technician
May 15, 2012

Recommended maintenance parts & accessories

Show 3 more
No more item to show