Model #580752011 Craftsman power washer, gas

  • Main Unit
    3 Results
  • Pump
    3 Results

Question and Answers

Q:

Craftsman Pressure washer 580752011

A:

Thank you for your question on the pressure washer not producing pressure.

I understand your concern with removing the unloader valve to clean it and not get to the same adjustment when you put it back together.

If the unloader is not closing it could cause this problem if you have no pressure at all.

With the water turned on do you get any water out of the wand if you pull the trigger without the engine running? If you do not then you may have a plugged nozzle.

If you count the turns on the knob when you take it off, you should be able to get it back together correctly.

It could also be a bad pump but I would work on the unloader first before I would replace pump parts.

Please make sure you do not have any clogged in the water flow. Hi or low pressure feed lines.

Please let me know how it turned out.

Sam A.

Read More
Sam A -
Sears Technician
October 25, 2012
Q:

What is the capacity of pump oil for pressure washer model 580752011? What type of pump oil?

A:

The pump on your pressure holds 120 ml of 80W90 gear oil.

Read More
Jimmy K -
Sears Technician
November 05, 2009

Recommended maintenance parts & accessories

Show 3 more
No more item to show