Model #56-4477-10-01 TAPPAN Countertop Microwave

  • Front Cover
    3 Results
  • Control Panel
    3 Results
  • Power Control
    3 Results
  • Body Parts
    3 Results
  • Door Parts
    3 Results
  • Optional Kit
    3 Results

Question and Answers

Q:

refrigerator laid down during transit. left upright for 24 hrs without plugging in and told to plug in for 3 min unplug for 10 (5-6 times) correct info?

A:

The refrigerator should be left upright for 24 hours after being laid down for transit. After 24 hours you can plug the refrigerator in and leave it turned on.

When a refrigerator is laid down for transit, some of the oil will run out of the compressor into the evaporator and suction line. Twenty four hours is adequate time for the oil to run back into the compressor.

Read More
Jimmy K -
Sears Technician
July 09, 2010
Q:

Follow up to "no spin problem" WFMC2100UC/01

A:

After the installation, the E:04 indicates "Door control broken". The E:20 indicates "Spinning aborted due to unbalanced load". The d:08 indicats "motor speed sensor failed." The d:10 indicates "Power limiter switch tripped." The E:09 indicates that communication was lost to the motor. 

I recommend that you have a service technician examine and repair this washer.

If you want to continue to troubleshoot the problem yourself, I recommend that you check the wire harnesses for damage and connection problems first. You may also have a defective speed sensor, bad control module or failed motor control.

If you need further assistance, let us know.

Thanks for choosing Sears PartsDirect.

Read More
Lyle W -
Sears Technician
March 23, 2015
Q:

Is 56" the width of the 56 X 84 Ricardo Ultimate Black Out Curtain?

A:

The 56 designates the width in inches. The 84 designates the height. For a window that is 84" wide, you should need just 2 of the panels. You should not need extra length for gathering on a black out curtain. You can also use the 114" wide by 84" long curtain for the 84" wide window.

Read More
Lyle W -
Sears Technician
February 17, 2010