Model #5-50-NORT8-32 PENFIELD Water heater, Gas

  • Functional Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Refregerator not cooling,50* on #5.

A:

Make sure that the air vent coming from the freezer to the refrigerator is not blocked. Check the inside back wall of that freezer compartment for excessive frost or ice. If you see ice on that back wall of the freezer, you could have an automatic defrost system problem. You can follow the procedure shown below to force a defrost in the refrigerator. Forcing this defrost may clear the evaporator so that the refrigerator resumes cooling. If it does, then you may have had an isolated incident where too much frost built up on the evaporator and caused the cooling problem. If the refrigerator cools properly for a while and then goes back up to 50 degrees, you will need to diagnose and repair the defrost system to fix this problem.

Here is a link for a video that shows information and troubleshooting for a refrigerator cooling problem: Refrigerator Not Cooling Repair . That information will help you understand the defrost system and airflow through the cabinet. This video may help you understand what is causing the cooling problem in your refrigerator. If you need more help with this cooling issue, reply with additional details and we will assist you further.

If you need parts, you can order them from the Sears PartsDirect website.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
May 19, 2011
Q:

Specif on part no. 580025. This is Woodruff key 5/32 x ??

A:

Thank you for your question.

I have looked up the part number you have submitted. That part number comes up as a screw. If you could please reply below with a model number and more details of the part you are referring to I will be happy to check the specifications. I am sorry for the inconvenience.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
June 18, 2011
Q:

What is a Craftsman lawn tractor model 917271141 engine output shaft size? It has a Kohler CV16.5S-43527 engine. Hoping it's a 1"X3 5/32" straight shaft.

A:

Thank you for your question.

I have checked on the specifications for your engine. The shaft is 1 inch with a 1/4 inch keyway. The problem I am having is the length of the shaft. The best I can tell it is about 3 inches. I have provided you with the spec sheet below. I hope this is helpful.

Please reply below if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
November 14, 2010