Model #548 Porter Cable saw reciprocating

  • Bayonet Saw
    3 Results

Question and Answers

Q:

Skil 548 Router

A:

Thank you for your question.

I am sorry you are having a problem with removing the bearing from the bearing cap. The bearing should fit snug in the cap. To remove the bearing lay the cap on a board face down. Then find a socket that will fit on the inter race. While holding the socket on the race, tap the bearing out with a hammer. The bearing should come out. To install the new bearing, flip the cap over and tap it in. This time try to find a socket that will sit on the outer race.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 03, 2013