Model #5392-1 TYPE F MILWAUKEE drill hammer

  • Unit Parts
    3 Results

Question and Answers

Q:

9114554190 --- f 1 code can i fix this myself and do i need parts and if so what type of parts ? what is f1 code

A:

You can try to reset the control by shutting off the house circuit breaker for the range for 3 minutes. If you restore power and still see that F1 code then the clock control board in the console will need to be removed and sent to CoreCentric Solutions to be repaired (about a $150 repair). That F1 indicates that a transistor in that clock control board has failed. The replacement part for that control board is no longer available. That is why the clock control board would need to be removed and sent off for repair. Here is a link for that control board repair center that has contact information: CoreCentric Solutions.com . To remove that control board, you will need to shut off the house circuit breaker for the range to completely disconnect electrical power . Follow the procedure shown in the image below to access that clock control board in the console.

If you need more help, let us know.

If you get to the point where you need to have a service technician complete this repair, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
February 07, 2012
Q:

3 in 1 Lawn Tractor blade type

A:

Thank you for your question.

The 3 in 1 blade is used for mulching, bagging, and side discharge. We have used this blade for years and it work good for all 3.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 15, 2012
Q:

dryer not working "F" code

A:

Thank you for your question and I understand your concern.

There should also be number displaying along with the "F" code. Without knowing what the fault code is I can only provide and list of the fault codes for you to view.

I added the list of fault codes in the image below.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post along with the fault code.

Read More
Joey S -
Sears Technician
September 09, 2011