Model #5370-1 TYPE E Milwaukee drill hammer

  • Unit Parts
    3 Results

Question and Answers

Q:

3 in 1 Lawn Tractor blade type

A:

Thank you for your question.

The 3 in 1 blade is used for mulching, bagging, and side discharge. We have used this blade for years and it work good for all 3.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 15, 2012
Q:

want to attach a 42inch craftsman bagger # 917.249791 to a 54inch craftsman tracto # 917.289900 I believe the diameter of the plastic tubes are the same

A:

Thank you for your question.I will be happy to assist you. I looked up the model numbers you submitted. The bagger will not work on your tractor. The mount is different and the lower chute will not match your deck. The correct bagger for your tractor is stock number 24917. The bagger can be ordered from the following link. Craftsman bagger model number 24917.  I hope this is helpful. Please reply below if you need further assistance.      Thank you for using Manage my life.Mark T.

Read More
Mark T -
Sears Technician
April 16, 2013
A:

evangelista, I do not think the bagger will work on the mower you are looking at buying. The reason is Murray only made a few mowers for Sears. The mowers they did make had a 43 inch mowing deck. The discharge opening on these mowers have a different opening than the 42 inch decks. If the bagger model number starts with 502 it may work. If it starts with 917. It will not fit. I hope this is helpful. Thank you for using Manage my life.

Read More
Mark T -
Sears Technician
June 25, 2013
See more answers
Q:

Where do I find the error codes for a Kenmore self cleaning oven? Mine is showing E 1 F5 or FS can't tell.

A:

The E1 F5 code on the type of Kenmore oven that you are describing indicates that you have a problem with the oven door lock assembly. The links for previous answers provided by Jacqueline S. in the above response verify this information.

You likely have a bad door lock assembly in the oven. Without a model number, I am not able to provide more specific access and testing information. If you are able to replace that component on your own, it will probably fix this problem. NOTE: Be sure that you shut off the circuit breaker to disconnect electrical power before accessing internal components.

You can order parts from the Sears PartsDirect website.

If you need more help, reply with additional details and the full model number of your Kenmore oven.

Read More
Lyle W -
Sears Technician
November 08, 2010