Model #536886220 Craftsman snowthrower, gas

  • Engine Assembly
    3 Results
  • Electric Start Assembly
    3 Results
  • Headlight Panel Assembly
    3 Results
  • Wheel Assembly
    3 Results
  • Frame Assembly
    3 Results
  • Drive Assembly
    3 Results
  • Gear Case Assembly
    3 Results
  • Discharge Chute Assembly
    3 Results
  • Auger Housing Assembly
    3 Results
  • Handle Assembly
    3 Results
  • Handle Assembly
    3 Results
  • Remote Chute Assembly
    3 Results
  • Chute Control Rod Assembly
    3 Results
  • Decals
    3 Results

Question and Answers

Q:

Snowblower friction shaft disk 536886220 Craftsman Snowthrower

A:

That jackshaft is difficult to remove. Complete disassembly of the drive components is usually necessary to access that jackshaft. If you're going to disassemble the drive system further, I recommend that you take pictures of the components along the way so that you can reassemble them correctly. I don't have specific systematic procedures for removing that jackshaft. It's a repair that you have to figure out from your observance of the parts and the parts list diagram. If you're not able to remove it yourself, then you may have to schedule a service technician to remove the jackshaft.

Read More
Lyle W -
Sears Technician
December 02, 2014
Q:

I have a Craftsman snow blower model 5366886220. I replaced the belts and friction wheel. Now it will not go either forward or reverse.

A:

Remove the cover from the drive compartment and see if the sprocket on the rear axle is turning. Sometimes the bolt through the sprocket and axle will shear.

If the sprocket is not turning, something is wrong in the friction wheel area.

Go back and recheck everything you took off to be sure you got it back together correctly.

Read More
Jimmy K -
Sears Technician
December 22, 2009

Recommended maintenance parts & accessories

Show 3 more
No more item to show