Model #536884351 CRAFTSMAN Snowthrower, Gas

  • Handle Assembly Repair Parts
    3 Results
  • Chute Control Rod Repair Parts
    3 Results
  • Discharge Chute Repair Parts
    3 Results
  • Auger Housing Repair Parts
    3 Results
  • Belt Cover Repair Parts
    3 Results
  • Frame Components Repair Parts
    3 Results
  • Engine And Drive Repair Parts
    3 Results
  • Electric Starter Repair Parts
    3 Results
  • Frame Components Repair Parts
    3 Results
  • Wheel Repair Parts
    3 Results
  • Decals
    3 Results
Find part by diagram >

Question and Answers

Q:

During operation of model 536 884351 Craftsman snowblower the chute fell off. Should there be 4 white guides on the chute mount?

A:

There are 2 plastic guides on the chute mount. The mounting bolts on the chute may have worked loose.

Read More
Jimmy K -
Sears Technician
December 09, 2009
Q:

Snow blower repair

A:

Thank you for your question.

I am sorry you are having a problem with your snow blower. I have checked the model number you have submitted. Your snow blower does not have shear pins. The problem is most likely the belt slipping. I have provided you with the instructions below on how to adjust the tension on the belt. If that does not cure the problem, I recommend replacing the belt. The part number for the belt is 319596MA and can be ordered from our parts website Sears Parts Direct .

I hope this helpful.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 16, 2011
A:

I should be able to help you with this problem. If you have the shear bolts removed and the augers will not come off, they are rusted to the shaft. I recommend spraying good quality penetrating oil on the ends of the augers. I prefer PB blaster but WD-40 will work. Then let it sit for a few hours. Have someone hold one of the augers while you try to break the auger loose. If the auger does not come loose, you might have to heat the augers with a torch. If you do not have a torch, you can call a local welding shop. They should be able to remove the augers for you. I hope this is helpful.

Read More
Mark T -
Sears Technician
January 28, 2011
See more answers

Recommended maintenance parts & accessories

Show 3 more
No more item to show