Model #5187AT-1 EUREKA Vacuum, Upright

  • Hood
    3 Results
  • Body
    3 Results
  • Accessories
    3 Results
  • Wiring
    3 Results
Find part by diagram >

Question and Answers

Q:

I hve Sears Snow Blower Mod 536.886440 that need impeller spring pin. Part 454565 is wrong as it is 1/4 inch when 1/8 inch is needed. How do I get right part?

A:

To get the correct spring pin for the impeller on your snow thrower look on the page that says "frame assembly" but is really the gearbox and impeller. The spring pins are item 341. The part number is STD572512 and the cost is $2.16 for a package of 2 pins.

The part number 454565 should cross over to STD572512. I think someone picked up the wrong package when your order was filled. If you order the STD572512 you should get the right pins.

Read More
Jimmy K -
Sears Technician
May 20, 2010
Q:

My Sears Kenmore Dryer, Model # 11064602300 runs fine, but no heat.

A:

Hi Glenna,

Thank you for submitting a question to Manage My Life.

Here is a link to a previous question on the same kind of dryer with this issue; My Kenmore dryer is not heating. Would it be hard to fix? . Follow Lyles troubleshooting in his answer to this question.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram or to purchase any parts needed; Sears Parts Direct .

I hope this is helpful. Check the things covered here, and if I may be of further assistance, include more details in a reply to this post.

Landell

Read More
Landell -
Sears Technician
January 23, 2012
Q:

kenmore elite 110.24966300 washer wont spin, belt appears to be out of position and lacks tension. How to change belt?

A:

Thank you for your question and I understand your concern.

Your Kenmore washer does not have a drive belt. The motor is connected to the gear case by a motor coupler. If the washer will not agitate or spin and only drains, the motor coupler is likely broken. I added a YouTube video showing how to access the motor coupler .

If it will agitate, the motor coupler is Okay. If the washer will drain and agitate but not spin, the clutch is likely worn and needs to be replaced.

Check the things I have covered here and if I may be of further assistance as more details become available, please reply to this post.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
February 28, 2012