Model #5-17-10MS7 ACE water heater

  • Functional Replacement Parts
    3 Results

Question and Answers


manual for the Hoover F7221?


Thank you for your question.


I am sorry you are having a problem finding the manual. I searched on our site for the manual but we do not have a complete copy of the manual. If you have the complete model number, I recommend looking up the manual on the Hoover website. Click the following link to be taken to their site.


I hope this is helpful. Please let me know if you need further assistance.


Thank you for using Manage my life.


Mark T.

Read More
Mark T -
Sears Technician
November 14, 2013

Why does my lawn mower's (Model 917.370680) spark plug cap keep falling off the spark plug. I can only go a couple of feet before it falls off.


Push that cap down firmly on the spark plug terminal. It should click or snap when it is firmly seated. If the wire still won't stay on the spark plug, the lawn mower will need to be serviced by a technician. It appears that this mower is brand new according to the model number. It has a 2 year warranty. I recommend that you take it to the nearest Sears Repair Center or Sears Store to have it repaired under the warranty.

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
June 11, 2011

No water flowing


Hi Eric,

Thank you for submitting a question to Manage My Life. I am sorry you are having problems with your dishwasher.

I assume your dishwasher is not filling. The first thing I recommend checking is the screens on the fill valve. Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts.

Access the water valve from the front of the dishwasher base by removing the toe kick. Remove two (2) T-20 Torx screws from toe kick and tilt toe kick out from under dishwasher. Remove base insulation (on models with insulation). Move sump inlet hose away from water valve (without disconnecting it).Disconnect wires from water valve, including ground wire. Remove two (2) T-20 Torx screws from water valve. Pull valve out from dishwasher and disconnect water hose from rear of valve. Remove any water from sump & base.

The remaining checks will require the use of an ohm/volt meter and you will have to perform ohm checks and/or live voltage checks. If you have a meter and are confident in your ability to safely perform these checks, reply to this post and I will be happy to assist you in any way I can.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services . Here is a link that you may use to view the parts list diagram and for parts purchases; Sears Parts Direct .

Thanks again for using Manage My Life.


Read More
Landell -
Sears Technician
July 15, 2011