Model #505 - CLASSIC KIRBY Attachments (Vacuum)

  • Attachments, Hose, Hose Ends, Tools
    3 Results
Find part by diagram >

Question and Answers

Q:

I have a new pro form treadmill, why does it hesitate when i walk on it?

A:

Thank you for your question as to why the treadmill hesitates while walking on it.

It is normal for the treadmill to slow down a little when you start on the walking belt. If the belt is slipping then you may have to adjust the tension on the walking belt on the back roller.

As you walk on the walking belt the sound of the motor will change pitch according to your walking gate.

You may also want to check the troubleshooting guide in your manual for the limits listed for this model.

If that does not help and since it is a new model you may want to call for service to check out the operation.

If you have more questions about the operation of the treadmill please reply to this thread.

Sam A.

Read More
Sam A -
Sears Technician
October 15, 2012
Q:

Can you help me with a dimension guide for an old Kenmore Classic Grill model 911-4698812?

A:

We don't have an installation manual. I checked and the installation module is no longer available for ordering.

If you send another question and tell us what dimensions you need we can probably get them for you.

Read More
Jimmy K -
Sears Technician
June 10, 2008
Q:

Installation manual for Kenmore Classic Grille Stove

A:

I don't find an installation manual available for this older Kenmore range. It is not available online or in hard copy as far as I can tell. Without the proper installation instructions, I do not recommend that you attempt to install this appliance.

Read More
Lyle W -
Sears Technician
June 03, 2010