Model #5019* Lxi direct view\digital 27" to 40" tv

  • Cabinet
    3 Results

Question and Answers

Q:

My Kenmore Elite Frig display lights blink and I cannot change settings. The ice also will not dispense. What could cause this?

A:

I am sorry, I can't pull up any information with any combination of the numbers you sent as your model number. It sounds like the control board has failed in your refrigerator. If it has a user interface board that could be the problem. Normally when you get flashing displays on an electronic control it is because a key has stuck and the control board is receiving 2 commands at the same time. You will probably need a technician to diagnose and repair the problem.

If you would like more specific information please send another question and include the model number off the tag on the refrigerator. We will be glad to help you.

Read More
Jimmy K -
Sears Technician
July 23, 2008
Q:

I have a model 50190 ATV Jack. Where is the oil fill plug on this jack? It is not obvious. I want to purge the air and fill it with oil.

A:

We have no information on this jack. We don't have a source number to be able to order parts or contact for technical information on the company that made the jack for Sears.

There has to be an opening in the jack that the oil was put in when it was made. Look carefully around the jack for a plug. The plug might be a small pipe plug that is installed with an allen wrench.

Read More
Jimmy K -
Sears Technician
May 26, 2009
Q:

Part Equivalent

A:

Thank you for your question on the old snow thrower part.

I am sorry but because the snow thrower is over 30 years old there is no known substitute replacement for this part. I went on the web sites as well and could not find this part from any other parts supply source.

If you want to try to fix this old machine then you will need to take the part to someone who may be able to machine a new one for you.

There were only about 10 models of this machine back then that used this part.

I am sorry that I was unable to help you.

Sam A.

Read More
Sam A -
Sears Technician
December 28, 2012