Model #49-2251-23-03 Tappan residential dryer

  • 3 Results
  • Cabinet And Component Parts
    3 Results
  • Door Parts
    3 Results
  • Console And Control Parts
    3 Results
  • Blower And Drive Parts
    3 Results
  • Burner, Igniter And Valve
    3 Results

Question and Answers

Q:

craftsman chainsaw 358.350601 part #49

A:

Thank you for your question.

I am sorry you are having a problem with the handle. In 18 years, I do not think I have ever replaced the springs in the handle. I searched for the instructions for installing the springs but did not have any luck. I was able to find out the instructions come with the set of isolators. I tried to get a copy of the instructions but I think it will be a while for these. If you need the instructions, I recommend ordering a set of isolators. The cost of the isolators is about $8.00. They can be ordered from the following link.

Isolator kit for Craftsman chain saw 545006036

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
April 05, 2012
Q:

KENMORE DRYER 110.72062100 WON'T START. DIAGNOSTIC TEST SHOWS "49" INSTEAD OF "88". THE DIAGNOSTIC TESTING WORKED EXCEPT FOR THE FACT THAT 49 WAS ALWAYS IN THE

A:

Since the 88 initially appears, the control panel with the LED display is apparently okay. This type of problem would likely be caused by a failed electronic control board.

Since the entire diagnostic test was successful except for the 49 being displayed instead of the 88, the control board may still be working properly in regards to other functions. Since the dryer is not starting, I recommend that you open and shut the door to see if the control is detecting the change of state in the door and beeping. If not, then you could have a bad door switch or a failed control board. A wiring failure between the door switch and the control could be causing this problem.

I provided additional troubleshooting help for the dryer not starting that is provided in the link above provided by Celene.

If you need more help, submit additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
August 26, 2010
Q:

Kenmore ultrasoft 180 625.388180 03

A:

Thank you for your question.

I can understand wanting to know what the small brownish orange balls are.

This is the resin beads that do the softening.

What has happened is that the distributor screen down in the bottom of the resin tank has broken and is letting the resin beads out into the water lines.

To repair this you will need to replace this part and it is not a nice job for a consumer because you have to remove the resin bed tank from the softener and then remove the resin and replace the distributor. This tank is full of water and resin beads and it is very heavy.

You will have to remove all the salt from the storage tank first.

Then remove the head off the top of the resin tank.

Then remove the top distributor screen and then you will see the resin.

If it was me doing this I would replace the resin bed also, since you have lost some and you have not cleaned the current bed before.

The part number for the distributor is: 7105047 and it sells for about $62.00.

The part number for the resin is: 0502272 and it sells for about $150.00.

My suggestion is to activate the bypass valve to the softener is not in the water supply line and while you will not have softened water it will stop the resin beads from getting into the water lines.

If you feel like you can do this repair and need more help please reply and I will be happy to help you further.

[Kenmore Water | http://www.kenmorewater.com/website/animations/product-animation/ts_index.html].

I have given you an interactive link to Kenmore Water.com so you can see how the unit works and it includes troubleshooting information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
April 13, 2011