Model #47-2828-00-01 Tappan residential dryer

  • 3 Results
  • Cabinet And Component Parts
    3 Results
  • Door Parts
    3 Results
  • Console And Control Parts
    3 Results
  • Motor And Pump Parts
    3 Results

Question and Answers

Q:

You did not answer my question. Go to the page and tell me which manual I use. Is it 00 or 01?

A:

I apologize for being clear. Use the manual or the 01 model.

Read More
Jimmy K -
Sears Technician
April 25, 2008
Q:

INTERNATIONAL HARVESTER MODEL 47

A:

Thank you for your question on the timing of the older model 47 IH square hay baler.

I am sorry but I do not remember the full process for timing the baler. It sounds like you may have sheared a shear pin or the timing for the twine ties are not in time with the plunger. What I do remember that if you sharpen the knives and move the plunger of until you get a clearance between the plunger and the knives of about 5/32 of an inch it should tie the knot better.

I will give you a link for acquiring the service manual for this baler below.

IH model square baler manual .

Yesterdays tractor has the service manual for this baler . You can also call them @ 1-800-583-2651.

Thank you.

Sam A.

Read More
Sam A -
Sears Technician
May 25, 2012
Q:

417.44152400 Error Code 47

A:

That E47 code normally indicates that you have a bad door lock assembly. In rare situations, a wiring problem or a bad control board could cause that code. If you want to fix this problem yourself, then replacing that door lock assembly (part 131763202) should fix your problem. You can order that part from this page: Door Lock and Switch Assembly for Kenmore Washer Model 417.44152400 . Be sure that you unplug the washer before accessing internal components. That link for a previous answer that Marc posted in the above response shows how to replace that component.

If you suspect that you have a wiring problem or a control board failure, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
August 30, 2012