Model #46-EB BROWER poultry equipment

  • Replacement Parts
    3 Results

Question and Answers

Q:

yt3000 46 will not go forward or reverse ????

A:

Thank you for your question.

I am sorry you are having a problem with the tractor. I will be happy to assist you in diagnosing the tractor. Next time you are on the tractor and it stops moving pull back on the brake pedal with your foot. If the tractor starts to drive, again I recommend looking at the clutch return spring and the belt. If the tractor still does not drive, I recommend checking the oil level in the transaxle. We have used a few different transaxles in the Yt300o tractors. If you can reply below with the model number under the seat, I will be happy to give you the instructions for checking the oil level.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services . Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
May 04, 2012
Q:

change blades 46" tractor

A:

Thank you for your question.

I am sorry you are having a problem with removing the blades. Some of the nuts are difficult to remove. If the block of wood is not holding the blade, I recommend using a larger piece of wood. Once you have the wood in place, put the wrench on the nut. While you hold the wrench on the nut hit the end of the wrench with a hammer. The blow from the hammer should break the nut loose. If this is does not work you might need an impact wrench. Instead of renting an impact wrench, I recommend taking the deck to a local auto repair center. They will usually remove the nut for you.
I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
June 26, 2012
Q:

46" mower bagger question

A:

Thank you for your question.

I will be happy to assist you. Our fit up chart does not show older attachments for newer tractors. I looked at the design of the older bagger ant think it will fit. Before you purchase it you need to be sure, the lower chute will fit the newer mower deck. If it fits and the back plate of the mower has four holes to mount the bracket it should work.



I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage My Life!

Mark T.

Read More
Mark T -
Sears Technician
October 01, 2012