Model #46-2817-23-01 Tappan washers

  • 3 Results
  • Console And Control Parts
    3 Results
  • Component Parts
    3 Results
  • Tub Detail
    3 Results
  • Washer Drive System And Pump
    3 Results
  • Transmission Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Washer And Miscellaneous Parts
    3 Results

Question and Answers

Q:

How to replace part number 418 2817 on opener Model 13953615SR? Please tell me steps. Thanks

A:

Unplug the garage door opener from the power. Loosen the chain at the trolley and remove it from the sprocket on the opener.

Remove the outer cover from the motor unit of the opener.

Remove the 3 screws that hold the sprocket and gear assembly to the top of the motor unit and lift the assembly out the top.

Remove the clip and the gear that drives the limit switch. Note the position of the door and of the limit switch. be sure they are in the same approximate positions when you reassemble.

Remove the screws that hold the motor to the motor unit housing and remove the motor unit. Mark the wires as you remove them so you can put them back as they were.

Drive the roll pin out of the motor shaft and slide the worm gear off the shaft.

Read More
Jimmy K -
Sears Technician
May 27, 2009
Q:

What does error code 01 indicate on my HE3?

A:

With out the model number or description of the product I do not know if you are referring to your HE3 washer or HE3 dryer. Based on the Dryer listed in your home profile the 01 code is not listed. The error codes on the dryer will display as "E1, E2, and E3"

There are no error codes 01 for the HE3 dryers or HE3 washers.

The 01 is not an error code.

Resubmit your question with the model number and details for specific information.

Read More
Joey S -
Sears Technician
April 11, 2008
Q:

LG Model #LDS5811ST/01

A:

Check the child lock function to make sure that function is not enabled as shown in the first image below. You did not indicate the error code that you are seeing on the dishwasher. The second and third images show the error codes for this type of dishwasher. If you see one of these error codes, you may be able to perform some of the troubleshooting shown in those images. Be sure that you shut off the circuit breaker for the dishwasher to completely disconnect electrical power before accessing internal components. If you need more help, reply with additional details (error code being displayed) and we will try to assist you further.

Read More
Lyle W -
Sears Technician
March 07, 2011