Model #44U877-0009-G1 Briggs & Stratton engine

  • Cylinder/sump/crankshaft
    3 Results
  • Head-cylinder/carburetor
    3 Results
  • Motor-starter/flywheel/alternator
    3 Results

Question and Answers

Q:

30" Kenmore Elite Electric Cooktop 44273 compatible with 30" Kenmore Electric wall oven 48833

A:

I posted a compatibility chart in the image below. According to that document, you can use that cooktop 44273 with the Kenmore wall oven model 48833. You should have no installation problems if you choose those appliances.


If you need more help, let us know. 

Read More
Lyle W -
Sears Technician
April 18, 2013
Q:

Drill press switch

A:

Thank you for your question.

I am sorry you are having a problem getting the switch. By looking at the image you sent and the image of the part on our parts website these are the same switch. if the switch is defective you have to replace the whole switch. If the switch came apart that is ok. Just remove the remaining parts of the switch, push the new switch in the hole, and connect the wires.

Please reply below if you need further assistance on the drill.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
February 24, 2012
A:

Hi Harold, I am a little confused. If you could please reply below with a model number and possibly, an image of the switch parts from the drill press. Then I should be able to find a complete switch for you.

Read More
Mark T -
Sears Technician
February 25, 2012
A:

Thank you for the reply. I think you have the correct switch this time. To remove the switch, unplug the drill press and gain access to back of the switch. When looking at the backside of the switch you should see 4 tabs. You have to push these tabs down. Once you have them pushed, push out on the switch. The switch should come out. This can be tricky to do but the good news is you are replacing it so you do not have to worry about breaking it. Just click on the image below to enlarge them. Please let me know if you run into problems.

Read More
Mark T -
Sears Technician
February 25, 2012
See more answers
Q:

How come this TV is so cheap compared to the others?

A:

They are the same series TV; one is just a larger screen. MSRP for the 37" is around 650 while the 32" is 550 according to Panasonic's own website. That is a normal jump from a 32" to a 37". The 37" seems to have some really good instant savings because it is featured this week in Sunday circular.

You can visit the weekly ad by going to Sears.com and entering your zip code on the top right marked "Deals & Weekly AD". The TV is on page 24 of the Sunday circular.

Read More
David A. - Personal Solutions Manager -
Sears Technician
May 04, 2010