Model #44-2407-23-03 Tappan laundry centers/combos

  • 3 Results
  • Cabinet Parts And Heater
    3 Results
  • Console, Control And Drum
    3 Results
  • Dryer Motor, Blower And Belt
    3 Results
  • Tubs, Water Valve And Lid Switch
    3 Results
  • Washer Drive System And Pump
    3 Results
  • Transmission Parts
    3 Results

Question and Answers

Q:

Craftsman GT 18/44

A:

Thank you for your question.

I will be happy to assist you. I have looked up the model numbers you have submitted. I am sorry the snow blade will not fit your tractor. The reason is the tractor does not have the front hanger brackets for the blade. The blade I show for your tractor is 486.24414.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
December 30, 2011
Q:

Craftsman GT 18/44

A:

Thank you for your question.

I will be happy to assist you. I have looked up the model numbers you have submitted. I am sorry the snow blade will not fit your tractor. The reason is the tractor does not have the front hanger brackets for the blade. The blade I show for your tractor is 486.24414.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
December 30, 2011
Q:

Kenmore ultrasoft 180 625.388180 03

A:

Thank you for your question.

I can understand wanting to know what the small brownish orange balls are.

This is the resin beads that do the softening.

What has happened is that the distributor screen down in the bottom of the resin tank has broken and is letting the resin beads out into the water lines.

To repair this you will need to replace this part and it is not a nice job for a consumer because you have to remove the resin bed tank from the softener and then remove the resin and replace the distributor. This tank is full of water and resin beads and it is very heavy.

You will have to remove all the salt from the storage tank first.

Then remove the head off the top of the resin tank.

Then remove the top distributor screen and then you will see the resin.

If it was me doing this I would replace the resin bed also, since you have lost some and you have not cleaned the current bed before.

The part number for the distributor is: 7105047 and it sells for about $62.00.

The part number for the resin is: 0502272 and it sells for about $150.00.

My suggestion is to activate the bypass valve to the softener is not in the water supply line and while you will not have softened water it will stop the resin beads from getting into the water lines.

If you feel like you can do this repair and need more help please reply and I will be happy to help you further.

[Kenmore Water | http://www.kenmorewater.com/website/animations/product-animation/ts_index.html].

I have given you an interactive link to Kenmore Water.com so you can see how the unit works and it includes troubleshooting information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
April 13, 2011