Model #42A707-1624-01 Briggs & Stratton engine

  • Sump Engine Assembly
    3 Results
  • Carburetor And Flywheel Assembly
    3 Results
  • Starter Motor
    3 Results
  • Cylinder Assembly
    3 Results

Question and Answers

Q:

What does error code 01 indicate on my HE3?

A:

With out the model number or description of the product I do not know if you are referring to your HE3 washer or HE3 dryer. Based on the Dryer listed in your home profile the 01 code is not listed. The error codes on the dryer will display as "E1, E2, and E3"

There are no error codes 01 for the HE3 dryers or HE3 washers.

The 01 is not an error code.

Resubmit your question with the model number and details for specific information.

Read More
Joey S -
Sears Technician
April 11, 2008
Q:

LG Model #LDS5811ST/01

A:

Check the child lock function to make sure that function is not enabled as shown in the first image below. You did not indicate the error code that you are seeing on the dishwasher. The second and third images show the error codes for this type of dishwasher. If you see one of these error codes, you may be able to perform some of the troubleshooting shown in those images. Be sure that you shut off the circuit breaker for the dishwasher to completely disconnect electrical power before accessing internal components. If you need more help, reply with additional details (error code being displayed) and we will try to assist you further.

Read More
Lyle W -
Sears Technician
March 07, 2011
Q:

I have a Sears tractor, Model #917275400. The engine # 31H777-0297-E1. The piston rods are blown.

A:

Thank you for your question.

I am sorry you are having a problem with the engine. The engine you are wanting to install will mount to the tractor but you will have to purchase a new muffler and rig up a new throttle cable. The original cable will not reach the new engines connection. The wiring will have to be spliced also. If you do not feel confident in your mechanical ability to complete the engine swap, I recommend staying with direct replacement engine.

I hope this helpful.

If you need further assistance, please reply below.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
August 09, 2011
A:

I have checked and can confirm that the single cylinder has a 1 inch x 3 5/32 inch. I have looked for the dimensions for the twin but could not find them posted. I recommend measuring the shaft on the twin before attempting the swap. If the shaft is not the same, you could have a hard time finding the correct pulleys.

Read More
Mark T -
Sears Technician
August 11, 2011
A:

The starters on these two engines are not interchangeable. I strongly recommend replacing the defective engine with the recommended replacement. The replacement engine will fit your tractor with out modifying. The engine can be ordered from the link below.

Read More
Mark T -
Sears Technician
August 14, 2011
See more answers