Model #420 GENERAL Kitchen Equipment

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers


Water / Ice Dispenser not Turning Off 79572053111 Kenmore Elite Refrigerator


Thank you for choosing and being a valued member.  I can certainly understand how frustrating it can be when your refrigerator dispenser is not working properly.

 I recommend testing the main water valve to make sure that it is not causing you the issue. 

Water valve:
Points: (1) to (2) 
360 ~ 420Ω = normal
Replace water valve if not in range. 

Points: (3) to (4)
360 ~ 420Ω= normal
Replace water valve if not in range. 

1) Turn off the water. Then separate the water line from the valve.
2) Separate the Mechanical Cover and Valve Screw.
3) Separate the housing and pull out the valve.
4) Befrore disconnecting the water lines, place a towel
under the water valve to catch any water that may come
out. Pull out the clip and press the collet to separte the
water line from the valve.

1) Disconnect funnel by pulling
down and forward.
2) Insert a flat blade screwdriver
into side hole at the bottom of
the dispenser cover assembly
to remove it.
3) Hold the bottom side of the
dispenser cover assembly as
shown in the picture, and pull
and remove it.
CAUTION: When replacing the dispenser cover, be
careful that the lead wire in not exposed and the water
tube is not pinched by the dispenser cover.

1) Separate the Housing of Cap Duct Motor.
2) Remove 3 screws to disassemble the motor.
3) When assembling a new Motor, always make sure of the
Duct Door and Link to install the Motor.
4) Assemble 3 screws.
5) Connect the Housing.

Dispenser DC Motor : When customer pushes the dispenser button, It pulls duct door of
dispenser internal and ice dispense from ice bank.

Test Points (1) to (2)
Result: 9.9 ~ 12.1Ω

You can also visit for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
June 16, 2015

I happen to have exactly the same problem with my elite fridge. The pressure plate hinge is grinding or rubbing on something - You mentioned some pictures, that would be helpful where are these pictures? Thanks, Rich

Read More
Richard -
January 05, 2016
See more answers

I need to know what oil filter to buy for my Craftsman T1000 Lawn Tractor, Model #247.203701 247.203701


Thanks for the inquiry and for using
You are correct, in order to find anything engine related such as the oil filter, air filter, or spark plug; you will need to input the engine model number into 
The engine model is stamped onto the engine, but based upon tractor 247.203701, I see the engine model is 4P90HU. Based upon that engine model, the oil filter is part number 951-12690. 
In regards to the drain plug with the square head, you are also correct about using a 3/8" ratchet with an extension (if needed) to remove the plug, they work great for that. There are 'special' square head drain plug removers that come in various sizes (almost like allens), but they price at about $15-$30. If you have a 3/8" ratchet, that should work like a charm. 
For convenience, I have provided a blue link below that you may click on to be directed to the SearsParts site to view and purchase the needed oil filter. 

Oil Filter for Model 4P90HU

Hope this helps and thanks for using We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
July 19, 2014

This is more or less a complaint. I had A Crafsman riding mower for well over 20 years. When I needed a part there was in the owner's manual a list of all parts and the part number. It also included the amount of oil in ounces that went into the crankcase along with the psi in the front and back tires, plus a whole plethora of data for maintaining your equipment in A1 shape. I have made 2 calls about how many ounces of oil goes into the crankcase with a new filter and how many ounces of oil goes into the crankcase without changing the filter. No one has been able to provide me with that data. The old manual was a super aid. The new manual is not worth destroying trees for.

Read More
Salvatore -
November 03, 2015
See more answers

Lg lcd 42Ld420, is there any way to check that if power supply and motherboard are changed by someone, or do they have any code or number which match each other 42LD450 Lg Lcd television