Model #41799370130 KENMORE laundry centers/combos

  • Drum
    3 Results
  • Blower And Base
    3 Results
  • Control Panel
    3 Results
  • Top And Cabinet
    3 Results
  • Tub, Basket, And Agitator
    3 Results
  • Gearcase/transmission
    3 Results

Error Codes

Error Code:



Question and Answers


Kenmore 41799370130. Dryer is fine, washer won't do anything. No fill, no action on any cycle.


Since the dryer is working, your symptoms indicate either a wiring problem or a timer failure in the washer. On some models, you could have a washer lid switch that is preventing the washer from filling. I am not able to see the exact wiring diagram for this model online. I provided a wiring diagram for the most similar model in the first image below. The wiring for your model may differ from the connections depicted in the diagram below. There should be a tech sheet that provides the exact diagram for your model inside the panel under the dryer as shown in the second image below. You would need to use the exact wiring diagram for your dryer for accurate technical information. If the tech sheet is missing, you can order a replacement from the Sears PartsDirect website . The part number is 131429400.

Using the wiring diagram for your laundry center, you may be able to unplug the washer and check the wiring connections for the power to the washer. In the wiring diagram below, L1 voltage is supplied to the washer from the dryer timer B connector. The neutral for the washer is connected from washer motor switch M1 to the dryer harness. If either of these wiring connections is broken, then the washer will not have power. You can also check the wiring connections on the lid switch of the washer. A failed timer could also cause your washer problem. NOTE: You should only conduct these technical checks if you are completely confident in your ability to safely access the internal components. Be sure to disconnect electrical power before accessing internal components. Internal edges in the laundry center can be sharp. Protective gloves are recommended.

If you are not able to diagnose the cause of your washer failure using the wiring diagram in your washer and the above tips, resubmit your question with additional details for more help with this problem if needed.

Read More
Lyle W -
Sears Technician
November 18, 2008

Top Parts