Model #41784052500 Kenmore residential dryer

  • Cabinet/drum
    3 Results
  • Front Panel/lint Filter
    3 Results
  • Controls/top Panel
    3 Results
  • Motor
    3 Results
  • Wiring Diagram
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

41784052500 electric dryer squeals

A:

Hi Scott,

Thank you for submitting a question to Manage My Life.

Here is a video that demonstrates replacing the rear bearing kit; Video . Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts. The dryer in this video may not look exactly like yours, but the procedure is basically the same.

You can't buy this at a Sears store but, you can do a Google search using part number 5303281153 along with your city and state and try to find this part locally.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram or for parts purchases; Sears Parts Direct .

I hope this is helpful. If I may be of further assistance please reply to this post.

Landell

Read More
Landell -
Sears Technician
December 12, 2011
A:

Hi Scott, The most likely thing that will cause what you are describing is a bad door switch. You can try bypassing the door switch, orange to tan, and then try starting the dryer. Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts. I hope this is helpful. Check the things I have covered here, and if I may be of further assistance please reply to this post. Landell

Read More
Landell -
Sears Technician
January 11, 2012
See more answers
Q:

Why won't my Kenmore dryer model 41784052500 run?

A:

Since it runs in the functional test, your symptom points to a failed electronic control board (Key 1 in the image below). Replacing this control board will likely fix your problem. You can order a new control board from the Sears PartsDirect website www.searspartsdirect.com . The part number for the new control is 134484213. NOTE: Be sure to unplug the dryer before accessing internal components.

Read More
Lyle W -
Sears Technician
Q:

kenmore electric dryer model #41784-052500

A:

Hi Rich,

Thank you for submitting a question to Manage My Life.

The fuses they are referring to are actually the house breakers. Electric dryers have 2 dedicated breakers; in older homes a fuse box is used. The dryer will run if only one of the 120 volt legs of 240 volt power is supplied to the dryer. If the second leg of 120 volt power is missing, then the dryer will not heat. So, locate the breaker box and check to see if on of the breakers for the dryer is tripped.

The next thing I recommend is checking for stored error codes. This dryer has a way of recalling error codes. I am including this information in a set of images below.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram or to purchase any parts needed; Sears Parts Direct .

Please perform the diagnostic tests detailed here and report back with your findings. Be sure to record any failures and when they occur along with any error codes that are displayed.

Landell

Read More
Landell -
Sears Technician
December 27, 2011