Model #41744082400 KENMORE Residential Washers

  • Control Panel
    3 Results
  • Cabinet/top
    3 Results
  • Motor/tub
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore 41744082400 washer giving error code "dds"

A:

The error code is "ddo" which means the dispenser drawer is not closed all the way or the magnet has fallen out from behind the dispenser drawer handle assembly. Your washer has a reed switch mounted on right side of the dispenser drawer opening which detects and closes when the dispenser drawer is shut. The magnet causes the dispenser drawer reed switch to close which will then allow the washer to start a cycle. I added a link below that will show you where the magnet fits. If the magnet fell out, the washer will not start. If you can find a rectangle magnet to fit into the area where it must fit then it would likely work. The magnet is part #131373800 or you could also locate the reed switch and cut the two wires and strip about 1/4 inch of insulation and then twist the two wires together on the side leading back to the control board and then it would not need the magnet. The replacement control boards did away with the reed switch connection. Note: Disconnect the power cord before removing the top panel and accessing the reed switch connection.

Where do I replace the magnet on the dispenser drawer for a Kenmore Super Capacity 3.5 cu. ft. washer model 417.44052400?

Read More
Joey S -
Sears Technician
October 12, 2010
Q:

Need error code list and instructions for Kenmore 41744082400

A:

This model of washer appears to have a digital display. I provided technical information for the error codes in the images below. You can recall the last error code using this information. NOTE: This information is intended for technicians. Follow electrical safety guidelines when using this data. Unplug the washer before accessing internal components. The troubleshooting tests describe some live voltage checks that should only be conducted by a service technician. I recommend that you skip those tests if you are troubleshooting a component problem.

You can order parts from the Sears PartsDirect website.

This information may help you with your washer. If you need more assistance, reply with additional details.

If you do not feel confident repairing a washer problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
April 20, 2011
A:

Here are additional pages.

Read More
Lyle W -
Sears Technician
April 20, 2011
See more answers
Q:

Where can I find the cubic foot size of my Kenmore washer model 41744082400?

A:

This model of washer has a 3.1 cu. ft. capacity.

Read More
Lyle W -
Sears Technician
October 06, 2008

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show