Model #404 Wagner power roller

  • Basic Unit
    3 Results
  • Gun And Roller Assembly
    3 Results

Question and Answers

Q:

leaking wagner power painter 404

A:

Thank you for your question.

I can understand wanting to repair this power painter and stop the leak in the unit.

I am sorry but according to the manufacture there are no repair parts available for this Wagner Power Painter model 404.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
July 14, 2011
Q:

kenmore washer 110. 45972 404, s.n. cst0808670

A:

Thank you for your question and I understand your concern. The wobbly impeller is not likely causing "F06" fault code to display. The "F06" fault code implies the motor control board is unable to properly detect the drive motor speed. You will need to disconnect the power cord from the power source and then check the wiring connections at the motor, motor control board and at the machine/central control board. The failure could be the motor control board, motor, machine/central control board or a break in one of the wires in the wire harness between the motor, motor control board or between the motor control board and the machine/central control board.

The motor can be tested using an OHM meter and the second image below shows what the resistances should be and what pins to check across for resistance.

If the motor windings and tachometer circuit test Okay, the likely failure is the motor controller providing there are no loose wiring connections between the motor, motor controller and the machine control board.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
December 03, 2010
Q:

Can you help me find a operating manual for a Wagner Power painter Model 404?

A:

I don't think we have an operating manual for you Wagner power painter. I could not find one.

You can see a parts list and diagram by going to www.sears.com. Select order parts on th home page. When it brings you the order parts info enter your model number. The page will bring you a list of 5 products with a model number of 404. Select the Wagner power painter.

I am sorry we don't have the operating manual but this should give you the information to find the parts you need.

Read More
Jimmy K -
Sears Technician
June 10, 2008