Model #40289032010 Kenmore residential dryer

  • Main Assy
    3 Results
  • Front Assyy
    3 Results
  • Control Panel
    3 Results
  • Drum Assy
    3 Results
  • Motor Assy
    3 Results
  • Heater Assy
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

kenmore dryer model number 40289032010 40289032010

A:

Thank you for your question and I understand your concern.

 There is a blue wire coming down from the control board which connects to one terminal of the thermal cut off. There is a black jumper wire connected to the other terminal of the thermal cut off and the other end of the black jumper wire connects to high limit thermostat. There is a blue jumper wire which connects to the other terminal of the high limit thermostat and the other end of the blue jumper wire connects to either one of the terminals on the heating element. The red wire connects to the other terminal on the heating element.  I added an image of the wiring diagram below.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
October 15, 2013
Q:

Kenmore dryer 402-89032010 not heating.

A:

Hi Luisa,

Thank you for submitting a question to Manage My Life.

This dryer must have a 220 volt power supply or the dryer will not heat. I recommend locating the two house circuit breakers dedicated for the dryer and reset both circuit breakers. Flip both circuit breakers OFF and ON 2-3 times and then see if your dryer will heat.

If it continues to run without heat then it could have one of the following failures:

  1. Control board.
  2. Thermostat.
  3. Thermistor.
  4. Thermal Cut off.
  5. Wiring.


I have included the troubleshooting information in the images below. The diagnosis of this issue will require the use of a multi meter. If you have a meter and are confident in your technical abilities please utilize the checks below.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website; Sears Home Services .

Here is a link that you may use to view the parts list diagram or purchase any parts needed for your appliance; Sears Parts Direct .

I hope this is helpful. Check the things I have covered here and if I may be of further assistance please reply to this post.

Landell

Read More
Landell -
Sears Technician
July 24, 2012
Q:

Kenmore Dryer #40289032010 - Stacking on Washer

A:

You will need the Samsung stacking kit for this laundry pair. The image below shows some of the information from the instructions for that stack kit. The dryer will need to be moved back so that it will not interfere with the operation of the controls on the washer. I am not aware of any way around this type of stacking configuration for the dryer.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
December 12, 2010

Top Parts