Model #40249032012 Kenmore residential washers

  • Main Assy
    3 Results
  • Cabinet Assy
    3 Results
  • Tub/drum Assy
    3 Results
  • Front/door Assy
    3 Results
  • Control Panel
    3 Results
  • Drawer
    3 Results
  • Drawer Housing
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Washer won't drain and spin is limited 40249032012 Kenmore Washer

A:

To check the drain pump in the Quick Test mode from the "power off" condition, press the Soil Key, Spin Key and Power Key all at the same time to enter that Quick Test mode. All LED's on the control will light up when you successfully enter that test mode. Press the Signal Key or Chime Key to run the drain pump in that diagnostic test mode.

If the drain pump won't run, then you may have a defective drain pump, a wiring failure in that circuit or a defective electronic control board.

Unplug the washer before accessing internal components. 

If you need more help, let us know.

Thanks for choosing Sears PartsDirect.

Read More
Lyle W -
Sears Technician
April 28, 2014

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show