Model #40249032010 Kenmore residential washers

  • Main
    3 Results
  • Frame Assy
    3 Results
  • Tub Assy
    3 Results
  • Door Assy
    3 Results
  • Control Panel Asy
    3 Results
  • Drawer Assy
    3 Results
  • Drawer Housing
    3 Results
  • Misc Parts
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

my kenmore model 40249032010 washer is not recieving water.

A:

Thank you for submitting a question to Manage My Life.

The first thing I recommend is making sure the water is turned on all the way. If the water is turned on you should make sure you have a water supply to the washer. Turn the water off and disconnect the hoses from the back of your washer. Place the hose in a bucket or nearby sink and slowly turn the water on. Also make sure the inlet screens on the washer are not clogged. The inlet screens are just inside the inlet valves where the supply hoses attach.

If you have water to the washer the next thing you can do is run the Quick Test Mode. I have included this in the images below. To enter the Quick Test Mode press Spin, Soil, & Power simultaneously with the power off. Press Spin Speed to test Door Lock/Unlock circuit. Press Temp Key (with door locked) to cycle through the Water Valves circuit test in this order: Cold Main, Bleach, Hot, then off.

If you have water to the washer and the valves are turned on and no water enters the washer, the remaining checks will require the use of a volt/ohm meter.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website; Sears Home Services .

Here is a link that you may use to view the parts list diagram or purchase any parts needed for your appliance; Sears Parts Direct .

If you have a meter and are confident in your technical abilities please reply below and I will be happy to assist you further.

Landell

Read More
Landell -
Sears Technician
May 07, 2012
Q:

See consumer reviews

A:

These Kenmore models have not been on the market for very long (less than 6 months). I was not able to find any consumer reviews on them beyond the Consumer Reports link that was provided above. This laundry pair is manufactured for Kenmore by Samsung. I did find some equivalent Samsung models that do have reviews posted on Sears.com. I provided links for those models below. This may help you. One of our experts has a similar Samsung model of washer. He gives this type of laundry pair high ratings. I have a similar LG washer and I also like it. The washer has a direct drive motor that is much more dependable than the belt drive front load washers. The only feature that takes some getting used to is the load sensing routine at the beginning of the cycle. Fill water is squirted into the washer in short spurts to wet the load so that the size can be measured. The capacity and performance are good. I hope that this additional information helps. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
November 17, 2010
Q:

How do I change the direction of the door from left to right on a front load washing machine #402-49032010

A:

Thank you for your question.

The way some of the laundry rooms are designed makes it inconvenient to have the door swing the wrong way.

  • I am sorry to tell you that only the dryer can be reversed. The washer door cannot be reversed.

  • I understand your situation. I would like to have my front frontloader door swing the other way also.

I am sorry to have to tell you this.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
October 01, 2010

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show