Model #38JN-2CX-94 MAGIC CHEF ranges, electric
Question and Answers
wshr mdl 11092284100 fr Feb 94 Will fill and cycle, will not drain. Mike fr ur parts said replace drain pump. Did same results What's wrong/fix?
Based on your symptom and details I must assume the washer motor will not operate when it should drain and spin. If the washer will not operate in any drain and spin cycles the failure is likely the lid switch. In order to access and replace the lid switch the control panel must be placed in the service position. Once the control panel has been placed in service position disconnect the lid switch harness connector, pop the two cabinet retainers off and tilt the cabinet forwards and off. NOTE: Disconnect the power cord from the power source before placing the control panel in the service position. See images below. The lid switch is part#285671 and is available at Sears Parts Direct .
My panasonic hdtv television pt-53wx52f has display convergence 2 problem,with multiple images
If the repair job only needs the amps and a few resistors you are looking at about $300 for the labor and the parts. If that’s all that’s needed then this is a good average based on the amps this TV uses. Some things that can make the price of the repair shoot up is if the technician finds something damaged on the board that he cannot repair on site but that’s not usually the case.
Merry Christmas How do I match Tnx for Garage openner with opener without dip switches on Tnx.
Thank you for your question on how to program the remote to the door opener.
There should be a green button on the back of the motor unit that you press and then press the button you want to program to the door on the remote.
The work light should flash once to tell you it has accepted the remote.
If you have anymore questions on the opener please provide the model number for the opener which is on the very top frame of the motor unit.
Sam A.