Model #37-1007-23-03 Tappan free standing, electric

  • Cover
    3 Results
  • Door Parts
    3 Results
  • Backguard
    3 Results
  • Cooktop, Broiler And Backguard
    3 Results
  • Body Parts
    3 Results

Question and Answers

Q:

GE profile top freezer too warm

A:

We can likely provide some technical tips that may help you resolve this problem but we will need to have the model number of your GE Profile refrigerator.

Here are some general tips that may help:

  • Check the back wall of the freezer for excessive ice or frost when the cooling deteriorates. A problem with the automatic defrost system could be causing the temperature fluctuations.

  • Monitor the compressor motor when the freezer is too warm. If the compressor is not running, you could have a problem with the control, the compressor or the wiring.

An intermittent problem can be difficult to diagnose. As noted above, reply with the model number and we will try to provide some detailed troubleshooting tips.

Read More
Lyle W -
Sears Technician
January 01, 2011
Q:

Treadmill motor repair

A:

Thank you for your question.

I am sorry you are having a problem with the treadmill. If you are getting the error code, I recommend checking the speed sensor and disc on the end of the motor. If the sensor is not connected or adjusted, the console will not register the speed and error out. If the wires are connected, make sure the disc is in the center of the sensor. If the sensor is adjusted correctly, you will need a volt ohmmeter to diagnose the treadmill. If you have a meter and feel confident making live voltage checks, just let me know.

I hope this is helpful.

Thank you for using Manage my life. Mark

Read More
Mark T -
Sears Technician
December 10, 2012
Q:

Kenmore ultrasoft 180 625.388180 03

A:

Thank you for your question.

I can understand wanting to know what the small brownish orange balls are.

This is the resin beads that do the softening.

What has happened is that the distributor screen down in the bottom of the resin tank has broken and is letting the resin beads out into the water lines.

To repair this you will need to replace this part and it is not a nice job for a consumer because you have to remove the resin bed tank from the softener and then remove the resin and replace the distributor. This tank is full of water and resin beads and it is very heavy.

You will have to remove all the salt from the storage tank first.

Then remove the head off the top of the resin tank.

Then remove the top distributor screen and then you will see the resin.

If it was me doing this I would replace the resin bed also, since you have lost some and you have not cleaned the current bed before.

The part number for the distributor is: 7105047 and it sells for about $62.00.

The part number for the resin is: 0502272 and it sells for about $150.00.

My suggestion is to activate the bypass valve to the softener is not in the water supply line and while you will not have softened water it will stop the resin beads from getting into the water lines.

If you feel like you can do this repair and need more help please reply and I will be happy to help you further.

[Kenmore Water | http://www.kenmorewater.com/website/animations/product-animation/ts_index.html].

I have given you an interactive link to Kenmore Water.com so you can see how the unit works and it includes troubleshooting information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
April 13, 2011