Model #36275508990 Kenmore free standing, gas

  • Burner Parts
    3 Results
  • Control Panel & Cooktop
    3 Results
  • Body Parts
    3 Results
  • Door & Drawer Parts
    3 Results

Question and Answers

Q:

my kenmore oven takes to long to preheat model #36275508990

A:

This type of problem is normally caused by a weak igniter in a gas range. See if the broiler burner works properly. If it does, then you can unplug the range and switch the bake and broiler igniters if you are comfortable with accessing those internal components. If the bake burner heats properly with that broil igniter installed, then replacing the weak igniter should fix this problem.

You can order that igniter from the Sears PartsDirect website. The part number for the igniter is WB13K21. Use ceramic wire nuts to connect the wires if the wire harness plugs do not match up.

Be sure that you unplug the range and shut off the gas supply before accessing internal components.

If you need more help, reply with additional details and we will try to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
April 28, 2011
Q:

Kenmore 36275508990 The stove burners & broiler light but the oven won't light.

A:

Even though you see the bake igniter glowing brightly, that component is likely causing this ignition failure. The theory of operation for the ignition system is shown in the image below. If the resistance of the ignitor is not decreasing to the point where it draws at least 2.9 amps of current, then the igniter will need to be replaced. A service technician will normally check the circuit for amp draw using a clamp-on ammeter. Most people don't have this tool. It would be impractical to buy one to check this single issue. Based on your symptoms, replacing the bake igniter will likely fix this problem.

You can order a new igniter from the Sears PartsDirect website. The part number is WB13K21.

Be sure that you unplug the range and shut off the gas supply before accessing internal components.

If you need more help, reply with additional details and we will assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 24, 2011
Q:

orifice on gas stove

A:

It seems that you are looking for the Sears PartsDirect.com website so that you can see parts diagrams and look up parts for your Kenmore range. Here is a link for that website: Sears PartsDirect .

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
May 20, 2011

Recommended maintenance parts & accessories

Show 3 more
No more item to show