Model #36275321002 Kenmore free standing, gas

  • Burner Parts
    3 Results
  • Control Panel & Cooktop
    3 Results
  • Body Parts
    3 Results
  • Door & Drawer Parts
    3 Results

Question and Answers

Q:

LP Conversion Instructions for Kenmore Range 36275321002

A:

I added the instructions how to convert to LP and you will need to reverse the procedure. I hope you still have the Natural gas orifices for the surface burners.

Read More
Joey S -
Sears Technician
July 20, 2010
Q:

Gas oven won't llight

A:

Thank you for your question and I understand your concern.

Before the oven will attempt to heat, the bake igniter located below the oven floor must receive voltage (120) from the electronic oven control/clock assembly. The bake igniter must glow and it must pull enough current/amperage to cause the oven gas valve to open. If the igniter is not getting the 120 voltage supply, the electronic oven control could be faulty or it could have a faulty oven gas valve. If the bake igniter is not glowing and it's getting the 120 voltage supply, the igniter is faulty/broken. If the igniter is glowing, the igniter is likely too weak to pull enough current/amperage to open the oven gas valve.

I added an image below with the theory of operation and instructions for accessing the bake igniter.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
November 15, 2012

Recommended maintenance parts & accessories

Show 3 more
No more item to show