Model #36274220302 KENMORE Free Standing, Gas

  • Gas & Burner Parts
    3 Results
  • Control Panel & Cooktop
    3 Results
  • Body Parts
    3 Results
  • Door & Drawer Parts
    3 Results
Find part by diagram >

Question and Answers


i have a stove my oven is not working do you know why is not working? the pilot light is coming on but the burner is not?


Hi, I see that your burners are not working on your oven. I found this great website for you on ovens. I attached the link below. Hope this helps!

Read More
Dezeray S -
July 20, 2010

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

From what you’re describing I suspect the oven igniter is faulty. If the oven igniter is weak it will not trigger the safety valve to open even though it is glowing. Remember to disconnect power before attempting access. The only way to confirm the diagnosis is to use an amp probe meter to test the current draw of the igniter or replace the igniter. I recommend replacing the oven igniter part number WB13K21

Please see the image below for instructions.

To remove the oven door; open the door to the broil stop position, use both hands on the door sides & lift the door straight off the hinges. Do not lift with the handle.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
biker dave -
Sears Technician
July 22, 2010
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show